Pool Storage Racks for Floats, Poles, and Hoses
For most households, the Pool Storage LLC Pool Float Hammock holds bulky floats best. EasyGoProducts’ EZPFH offers a simpler budget install. Rubbermaid’s FastTrack Garage Wall Rail Storage Kit organizes poles, nets, and hoses on one wall rail, keeping equipment off the garage floor entirely.
Pool floats, skimmer poles, and chemical jugs pile up fast once swimming season winds down. A ceiling hammock solves the float problem, a wall rail handles poles and tools, and a rolling cart covers chemicals that need to move between shed and poolside.
Picking the right rack depends on what actually clutters the space, not just square footage. We compared mount type, weight capacity, and material across seven current listings, then checked owner feedback on rust resistance and install difficulty.
Our top picks
Pool Storage LLC Pool Float Hammock
A mesh sling stretches across two rafters or wall studs to hold bulky floats above head height. Straps extend up to eight feet, fitting garages with different ceiling heights. Marine-grade mesh resists mildew better than a sealed storage bin.
Pros
- Frees floor space for parking or bins
- Marine-grade mesh dries floats instead of trapping moisture
- Adjustable straps fit varied ceiling heights
Cons
- Mounting requires drilling into rafters or studs
- Not built for poles or rigid equipment
EasyGoProducts EZPFH Pool Float Hammock
Two nylon straps and a mesh panel form a simple sling sized for medium floats. Four screws into joists complete the install, which keeps setup quick. Coverage tops out around three floats, smaller than larger multi-float hammocks.
Pros
- Four-screw installation finishes in minutes
- Lightweight nylon mesh dries floats between uses
- Compact footprint suits smaller garages
Cons
- Fixed six-foot straps limit placement options
- Holds fewer floats than larger hammock models
Xbrand Pool Float Storage Hammock XL
A compact sling suits homes with only a float or two to store. Polyester mesh stretches to cradle odd shapes like tubes and loungers. Its smaller footprint mounts in tight spaces near a garage door or shed wall.
Pros
- Lower capacity keeps setup simple
- Stretchy mesh accommodates irregular float shapes
- Fits tight wall spaces
Cons
- Holds only one or two floats at a time
- Fixed strap length cannot extend for taller ceilings
Rubbermaid FastTrack Garage Wall Rail Storage Kit
A steel rail mounts horizontally and accepts sliding hooks rated for up to 50 pounds each. Skimmer poles, nets, and hoses hang individually instead of tangling in a bin. The same rail also holds general garage tools once pool season ends.
Pros
- Hooks reposition along the rail as gear changes
- Powder-coated steel resists rust in humid garages
- Doubles as general storage in the off-season
Cons
- Reaching the full weight rating needs stud mounting
- Vertical poles still touch the floor without a floor cap
Poolmaster Wall-Mount Pole and Accessory Caddy
Three vertical slots keep skimmer poles upright and separated instead of leaning against a wall. Two side hooks hold nets and brushes so handles stay off the ground. Powder-coated steel construction suits covered patios and pool sheds.
Pros
- Keeps poles vertical and off wet flooring
- Side hooks separate nets and brushes from poles
- Compact footprint near pool equipment pads
Cons
- Fits poles only up to 1.25 inches in diameter
- Not rated for full outdoor exposure without cover
Vinsani Wall-Mounted Hose Reel Storage Cart
A crank handle winds vacuum and backwash hoses onto the reel instead of leaving them coiled on the deck. The bracket holds up to 100 feet of hose, enough for most above-ground and inground vacuum lines. Powder-coated steel resists corrosion from chemical splash.
Pros
- Crank mechanism speeds up winding and unwinding
- Rust-resistant coating handles chlorine exposure
- Wall mount keeps hoses off wet decking
Cons
- Not designed for floats or rigid equipment
- Needs a solid mounting surface, not fencing
Suncast Resin Rolling Storage Cart
This rolling cart moves chemical jugs, test kits, and towels between shed and poolside without lifting. Resin construction will not rust the way metal carts do near chlorine. Two locking casters keep it steady once positioned.
Pros
- Resin shell will not rust from chemical splash
- Locking casters hold the cart steady when parked
- Open shelves fit jugs, kits, and towels together
Cons
- No enclosed storage to block sun or rain
- Lower weight capacity than fixed wall-mounted racks
How to choose
What Should You Look for in a Pool Storage Rack? Mount type sets the starting point, whether that’s a ceiling hammock, wall rail, vertical caddy, or rolling cart. Weight capacity matters most for poles and hose reels, since one hook or bracket often carries the full load. Powder-coated steel and resin resist rust better than untreated metal near chlorine and moisture. Drainage and rust resistance decide whether a rack survives outdoor exposure or needs a covered spot.
Which Rack Works Best for Pool Floats and Inflatables? Mesh hammocks from Pool Storage LLC and EasyGoProducts stretch across ceiling joists to cradle bulky floats above head height. Open mesh lets water drip and air circulate, so floats dry instead of mildewing inside a closed bin. Households with only one or two floats do better with a compact sling like the Xbrand model. Capacity, not just physical size, should drive the choice between a full and compact hammock.
How Do You Store Poles, Skimmers, and Nets? Vertical slots on the Poolmaster caddy keep poles upright and separated so handles do not tangle. Rail systems such as Rubbermaid’s FastTrack use sliding hooks rated by weight, letting nets, brushes, and hoses hang individually. Standard telescoping poles run about 1.25 inches in diameter, a spec worth checking against caddy slot sizing. Keeping poles off wet flooring also cuts down on corrosion at the tip.
What’s the Best Pool Storage Setup for Small Spaces? Compact wall slings and single-slot caddies fit apartments, townhomes, or small side yards without eating floor space. A rolling cart adds mobile storage for chemicals in sheds too small for a fixed rack. Pairing a small hammock with a rail or caddy covers floats and tools without a full garage buildout. Renters should confirm wall material before drilling, since drywall anchors carry less weight than studs.
Side by side
| # | Model | Mount type | Best for | Score | Price |
|---|---|---|---|---|---|
| 1 | Pool Storage LLC Pool Float Hammock | Garage ceiling or wall | Best overall | 9.4 | Check price |
| 2 | EasyGoProducts EZPFH Pool Float Hammock | Wall or ceiling joists | Best value | 9.1 | Check price |
| 3 | Xbrand Pool Float Storage Hammock XL | Wall mount | Best budget | 8.8 | Check price |
| 4 | Rubbermaid FastTrack Garage Wall Rail Storage Kit | Horizontal wall rail | Best for pool poles and tools | 8.6 | Check price |
| 5 | Poolmaster Wall-Mount Pole and Accessory Caddy | Wall bracket | Best for skimmers and nets | 8.4 | Check price |
| 6 | Vinsani Wall-Mounted Hose Reel Storage Cart | Wall-mounted bracket | Best for pool hose storage | 8.2 | Check price |
| 7 | Suncast Resin Rolling Storage Cart | Freestanding on wheels | Best for mobile chemical storage | 8.0 | Check price |
Common questions
How do you store pool floats when they’re not in use?
Most owners hang floats in a mesh hammock or sling mounted to a garage ceiling or wall. Mesh lets residual water drain and air circulate, which cuts down on mildew compared to sealed bins.
What’s the best way to organize pool toys in a garage?
Combine a float hammock for inflatables with a wall rail or caddy for poles and nets. Separating soft floats from rigid tools keeps both types from tangling or getting punctured.
Can a pool float hammock hold multiple floats at once?
Larger models like the Pool Storage LLC hammock hold up to four floats, based on the listed capacity. Smaller slings such as the Xbrand model fit only one or two floats comfortably.
Is a wall-mounted rack better than a rolling cart for pool gear?
Wall racks free up floor space and suit fixed items like poles and hoses. Rolling carts work better for chemicals and accessories that move between the shed and poolside.
Do pool storage racks hold up outdoors year-round?
Powder-coated steel and resin racks handle chemical splash and humidity better than untreated metal. Fully exposed racks still benefit from a covered patio or shed to limit direct sun and rain.
What size pool float hammock do I need?
Match strap length to your ceiling or wall span, and check the stated float capacity before buying. A household with several large floats needs a multi-float hammock rather than a compact single-float sling.
How do you store a pool skimmer pole?
Vertical caddies with dedicated slots keep standard 1.25-inch poles upright and separated from other equipment. Wall rail systems with hooks work as an alternative when floor space near the pool is limited.
Pool float hammock vs mesh storage bin: which is better?
Hammocks mount overhead and keep floats off the floor entirely, while bins sit on the ground and take up footprint. Owners with limited floor space in a garage generally prefer the ceiling-mounted hammock option.
How much weight can a garage wall rail hold?
Rubbermaid’s FastTrack rail rates each sliding hook for up to 50 pounds, though reaching that rating requires anchoring into wall studs. Drywall anchors alone carry considerably less weight.
Our take
Ceiling and wall hammocks from Pool Storage LLC and EasyGoProducts handle floats best, while rail and caddy systems from Rubbermaid and Poolmaster suit poles and tools. Matching the rack to what actually clutters a pool area matters more than picking the priciest option. A rolling cart like the Suncast model fills the remaining gap for chemicals and loose accessories.
